BMYFM - RP606Z, MT TONER POSITIVE-POSITIVE
- MSDS: BMYFM
- Manufacturer: MINOLTA CORP
- Product Name: RP606Z, MT TONER POSITIVE-POSITIVE
- National Stock Number: 6850-00N028645
Product Identification
Product ID:RP606Z, MT TONER POSITIVE-POSITIVE
MSDS Date:01/31/1990
FSC:6850
NIIN:00N028645
MSDS Number: BMYFM
Responsible Party
RAMSEY, NJ 07446
US
Emergency Phone: 201-825-4000
Info Phone: 201-825-4000
Cage: GO339
Contractor
Telephone: 201-825-4000
Cage: 23736
Ingredients
STYRENE ACRYLATE COPOLYMER
CAS: 25153-46-2
Fraction By Weight: >80%
COPPER OXIDE
CAS: 1317-38-0
RTECS: GL7900000
Fraction By Weight: 5-10%
ORGANIC PIGMENT
CAS: 32517-36-5
Fraction By Weight: 1-5%
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 1-5%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
PROPENE POLYMERS; (POLYPROPYLENE)
CAS: 9003-07-4
RTECS: UD1842000
Fraction By Weight: 1-3%
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT)>5 G/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER, AS A MIXTURE IS CONSIDERED A
NUISANCE DUST. EXPOS LIMITS:PEL:15 MG/M3; TLV:10 MG/M3.
ACUTE:MINIMAL RESP TRACT IRRIT MAY OCCUR AS W/EXPOS TO LG AMTS OF
ANY NONTOX DUST. MAY CAUSE COUGH & RAISE P HLEGM. TONER PRESENTS
LOW HAZ FOR USUALOCCUP SETTINGS. RESULTS OF 1 ANIMAL STUDY WHERE
RATS INHALED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:TONER THAT WAS 10 TIMES MORE RESP THAN
COMMERCIALLY AVAIL TONER WERE OBSERVED TO HAVE NO LUNG CHANGES @
LOW EXPOS (MOST RELEVANT LEVEL TO POTNTL HUMAN EXPOS). AT HIGHER
LEVELS A SLIGHT DEGREE OF LUNG FIBROSIS WAS OBSERVED DUE TO EXCESS
AMTS OF DUST RETAINED IN LUNGS FOR PRLNG INTERVAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:WASH NOSTRILS, RINSE MOUTH. INGEST:DILUTE STOMACH
CONTENTS W/SEVERAL GLASSES OF WATER. EYES:FLUSH W/WATER FOR AT
LEAST 15 MINUTES. SKIN:WASH W/SOAP & WATER.
Fire Fighting
Extinguishing Media:WATER, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard:TONER IS COMBUSTIBLE POWDER. WHEN
DISPERSED IN AIR, IT FORMS EXPLOSIVE MIXTURES.
Accidental Release
Spill Release Procedures:IF SPILLED, SWEEP UP OR VACUUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED IN MINOLTA
EQUIPMENT. USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Protective Gloves:NONE REQD WHEN USED AS INTENDED (SUPDAT)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PROT GLOVES:IN MINOLTA EQUIPMENT.
Chemical Properties
HCC:N1
Spec Gravity:1.2 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, FAINT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:PRODUCTS OF COMBUSTION ARE TOXIC.
AVOID BREATHING OF SMOKE.
Disposal
Waste Disposal Methods:DO NOT INCINERATE. NO SPECIAL TECHNIQUES BEYOND
NORMAL PRACTICE. ENSURE CONFORMITY W/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.